BLW-54MF support WDS(Repeater/Bridge) function in Router/AP mode
1.) Please check the two BLW-54MF LAN MAC address in status page.
2.) Please set the SSID & Channel on the two BLW-54MF. For example: BLW-54MF A: SSID is Test; Channel is Ch4 BLW-54MF B: SSID is Test2; Channel is Ch4, The two BLW-54MF Channels must be the same.
Repeater Mode
3.) Please select the WDS mode(Repeater or Bridge mode), and input LAN MAC address of BLW-54MF B on new device-join WDS of BLW-54MF A; and input LAN MAC address of BLW-54MF A on new device-join WDS of BLW-54MF B.
Bridge Mode
＊＊Attention＊＊
1.) Please set the static IP address on BLW-54MF B, and the static IP address must be the same with the segment on BLW-54MF B.
