2.Open the web browser, and login to the WEB UI of NAS-01G. Choose “Maintenance” and then click “Browse” on the Firmware Upgrade column. Find the just downloaded firmware (*.web format) and then click “Update”.
3.After upgrading firmware, go to the Character Set & UPNP & Printer column and then click browse to load “ntx_libra.tgz” file. Click “Apply” to run the program.
Please note that the use of P2P functions, as well as to FTP & DLNA & iTunes server function must be updated ntz_libra.gtz
4.After update completed, click “Restart” to re-open the system.
5.Please make sure that the firmware and UPNP & Printer functions are all updated and successfully installed.
10.Click the installed “” icon on desktop. And then click “Connect”.
11.Click “Yes”
12.Please enter the IP address of NAS-01G on the Host column and then click “Save host setting as current selection”. After that, click “Connect” to make a connection with NAS-01G.
13.Wait for the following pop-up, and then click “Preferences” to do the configuration.
14.Go to “Networks” and then check the “enable_bittorrent” check box. Click “Apply” and “OK”.
15.After that, you may copy the seed of Mldonkey and then paste the seed to the Input link and start to download.
16.After loaded the seeds, even if you are not using PC, you may turn off the computer, however, NAS-01G can still continue downloading the BT file.
17.After Mldonkey finishes downloading the file, you can go to the “incoming” folder in Share/Mldonkey folder in NAS-01G to find the downloaded file.
” icon on desktop. And then click “Connect”.
