|
Setting up the Primary BLW-54CR
Start the WEB browser,
In the URL field, enter 192.168.1.1
Enter the User Name: "admin”, and Password: “0000”.
Click “General Setup”
Click “Wireless”
Click “Basic Setting”
Scroll down the Mode menu and change the Mode to AP+WDS
Set the ESSID as “PCI”
Set the Channel Number as 3
Click “Advanced Setting”,
change the Authentication Mode to Open system
Click “WDS Setting” and check the WDS check box and Enable WDS function
Stuff with the Second MZK-W04 N MAC Address at Add WDS AP
Check the Mac Address
Click “LAN Setting” set Default Gateway as 192.168.1.1
Scroll down the DHCP menu and change the DHCP to SEVER,
then press Apply
Setting up the Secondary BLW-54CR
Start the WEB browser,
In the URL field, enter 192.168.1.1
Enter the User Name: "admin”, and Password: “0000”
Click “General Setup”
Click “LAN Setting”, change the IP Address to 192.168.1.2
Set Default Gateway as 192.168.1.1
Scroll down the DHCP menu and change the DHCP to Disable,
then press Apply
A “The page cannot be found” message might show up. Please type in the new IP address of the MZK-W04N (192.168.1.2) in the Web Browser’s URL field
Start the WEB browser,
In the URL field, enter 192.168.1.2
The User Name: "admin”, and Password: “0000”
Click “General Setup”
Click “Wireless”
Click “Basic Setting”
Scroll down the Mode menu and change the Mode to AP+WDS
Set the ESSID as “PCI”
Set the Channel Number as 3
Click “Advanced Setting”,
Scroll down the Authentication Mode menu and
change the Authentication Mode to Open System, then press "Apply"
Click “WDS Setting” and check the WDS check box and Enable WDS function
Stuff with the first MZK-W04 N MAC Address at Add WDS AP
Use the Wireless LAN program to search MZK-W04N.
The base station will show two SSIDs of homologies, but the MAC Address are different
Link any MZK-W04N to get to the internet
|
